Photos from current listings. Actual item, color, and included accessories may vary.
Zep Neutral PH Industrial Floor Cleaner Buying Guide
Zep Neutral pH Industrial Floor Cleaner is a concentrated, pH-neutral liquid detergent engineered to lift soils from finished floors without dulling waxes or attacking floor sealers. The key trade-off is dilution accuracy and surfactant strength versus the risk of over-concentration leaving haze or residue. Buy the concentrate only if you can measure dilution ratios precisely and need sealer-safe cleaning; skip it for heavy grease or unsealed concrete where alkaline or acidic specialty cleaners are required.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- Household Cleaning & Paper Supplies
- Status
- Offers available
- Data updated
- Nov 18, 2026
Current offers
Highlights
- pH-neutral formulation (nominally 7) preserves floor waxes, acrylic sealers, and polished concrete without the dulling caused by alkaline degreasers.
- Concentrated 1-gallon format dilutes at roughly 1:64 to 1:128 for routine mopping, yielding 64–128 gallons of ready-to-use solution per gallon.
- Neutral chemistry suits auto-scrubbers, mop-and-bucket, and spray-and-buff methods across VCT, terrazzo, sealed concrete, and ceramic tile.
- Surfactant blend lifts light-to-medium soils; it is not a stripper, so old finish buildup requires a dedicated alkaline stripper first.
Best use cases
- Best fit: daily or weekly maintenance of VCT, terrazzo, sealed concrete, and ceramic tile in commercial, industrial, or institutional settings where sealer integrity matters.
- Best fit: auto-scrubber fleets that need a low-foam, neutral detergent compatible with standard recovery tanks and squeegee pick-up.
- Wrong fit: stripping old wax, heavy grease in auto shops, or unsealed concrete—use an alkaline degreaser or acidic cleaner instead; neutral pH will not cut those soils.
- Wrong fit: spot-cleaning unknown floor finishes without a test patch—neutral is safe for most sealers but always confirm compatibility on a hidden area first.
Buying tips
- Measure dilution precisely: 1:64 gives roughly 2 oz per gallon of water for routine mopping; 1:128 gives 1 oz per gallon for light soil—over-concentration leaves haze.
- Confirm the concentrate is Zep Neutral pH Floor Cleaner (dilutable), not a ready-to-use Zep neutral cleaner; RTU versions cost more per gallon of solution.
- Check sealer compatibility: neutral pH is safe for most acrylics and urethanes, but solvent-based or epoxy sealers may still require a manufacturer-specific cleaner.
- For auto-scrubbers, verify low-foam formulation; high-foam detergents can trip float switches and leave residue in recovery tanks.
Specs
| pH Level | Neutral (nominally 7) |
|---|---|
| Form | Concentrated liquid (dilutable) |
| Dilution Ratio | 1:64 to 1:128 |
| Floor Compatibility | VCT, terrazzo, sealed concrete, tile |
Alternatives to compare
Related searches
What to check before buying
- Identify your floor type and existing finish: VCT with wax, sealed concrete, terrazzo, or ceramic tile—neutral is appropriate; unsealed or greasy floors need a different chemistry.
- Confirm you have a measuring cup or proportioner that can dose 1–2 oz increments accurately; concentrate errors cause haze or streaking.
- Check auto-scrubber compatibility: low-foam neutral detergents are standard, but confirm your machine's recommended dilution ratio and tank capacity.
- Verify storage: concentrate should be stored above freezing and out of direct sunlight; a 1-gallon jug needs shelf space and a secure cap for safety.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







