Trash Can Liner Buying Guide
Trash can liners are polyethylene bags sized to a specific can volume, and the primary trade-off is resin grade and thickness versus cost: linear low-density polyethylene (LLDPE) stretches, while high-density polyethylene (HDPE) is stiff and tear-prone. Buy by matching the liner's stated gallon capacity to your can's measured volume, then step up in thickness (mil) for sharp or heavy waste. Durable liners use LLDPE at 1.0 mil or thicker with a star-sealed bottom; thin HDPE under 0.5 mil is a compromise reserved for dry, light office waste.
At a glance
- Price range
- Price range not synced yet
- Category
- Household Cleaning & Paper Supplies
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Resin type governs performance: LLDPE liners stretch and resist punctures, HDPE liners are crinkly and tear at the seam under load.
- Thickness in mil separates duty tiers: 0.35–0.5 mil for paper/office waste, 0.7–1.0 mil for kitchen and mixed refuse, 1.2 mil+ for construction or yard debris.
- Bottom construction matters: star-sealed bottoms distribute weight and resist leaks better than flat-sealed or gusseted-sealed bottoms.
- Sizing follows can volume: a 13-gallon kitchen can takes 13-gallon liners; using an undersized liner stretches the rim and splits seams.
Best use cases
- Kitchen and mixed household waste: choose 13-gallon LLDPE at 0.9–1.2 mil with star-seal bottom; skip 0.35 mil HDPE office liners that puncture on food packaging.
- Bathroom and office dry waste: 4–6 gallon LLDPE at 0.5–0.7 mil is sufficient; skip heavy 1.5 mil contractor bags that waste material and cost.
- Yard debris and construction cleanup: use 33–55 gallon LLDPE at 1.5–3.0 mil or drum liners; skip thin kitchen liners that split on branches or rubble.
Buying tips
- Measure can height × rim diameter × base diameter to compute volume; a 13-gallon can is roughly 24 in tall with an 18 in rim — buy 13-gallon liners, not 10-gallon.
- Match liner width to can circumference plus 2–3 in of overhang: a 13-gallon liner typically measures 24–28 in wide by 30–36 in long.
- Choose LLDPE for anything wet or pointed; choose HDPE only for dry paper waste where crinkle stiffness helps the liner stay open.
- Step up one mil for kitchen cans that receive glass, bones, or takeout containers; 0.7 mil is the practical minimum for mixed refuse.
Specs
| Resin Type | LLDPE stretch vs HDPE stiff |
|---|---|
| Thickness Tier | 0.35–3.0 mil by duty |
| Capacity Range | 4–55 gal by can size |
| Bottom Seal | Star-sealed vs flat-sealed |
Related searches
What to check before buying
- Can volume in gallons: verify the can's stated capacity matches the liner's gallon rating before buying a case.
- Can shape and rim: round cans take standard flat liners; rectangular or slim cans need liners sized to the longer rim dimension plus overhang.
- Waste type: wet food, sharp packaging, or yard debris requires LLDPE at 1.0 mil or thicker; dry office paper tolerates 0.35–0.5 mil.
- Dispenser or roll format: confirm whether your can uses a liner dispenser or you need perforated roll packs versus flat-packed sleeves.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
